Miele W 320 Operating Instructions Manual Download Page 39

Page: 39 / 68

A fault indicator light comes on but the wash programme con-
tinues as normal.

Fault indicator

Possible cause

Remedy

The Check drain light
flashes.

The drain outlet is re-
stricted.

Clean the fluff (drain) filter
and drain pump.

The Check inlet light
flashes.

The water inlet is re-
stricted.

Check whether

–

the stopcock is opened
wide enough.

–

the inlet hose is kinked.

The filter in the inlet
hose is dirty.

Clean the filter.

The Excess detergent
check light comes on.

Excessive foam has
built up during wash-
ing.

Use less detergent next
time and follow the recom-
mendation on the packag-
ing.

The Main wash indicator
light flashes in the
programme sequence
display.

There is a fault.

Start the programme again.
If the fault indicator occurs
again, contact the Service
Dept.

The Anti-crease/Finish
indicator light flashes in
the programme se-
quence display.

The position of the programme selector was altered
after the start of the programme. Turn the
programme selector back to the programme previ-
ously chosen.

To switch off the fault indicator: Switch off the machine with the I-ON/0-OFF but-
ton and turn the programme selector to

Finish

Problem solving guide

Summary of Contents for W 320





































































Search results

Summary of Contents for W 320

Reviews:

Related manuals for W 320

Brands by name

Popular brands

Miele W 320, Operating Instructions Manual

Search results

Summary of Contents for W 320

Reviews:

Related manuals for W 320

Brands by name

Popular brands