Miele W 320 Operating Instructions Manual Download Page 63

Page: 63 / 68

Top-up rinse for COTTONS

When this is activated, additional wa-
ter flows into the drum at the end of
the main wash and the suds are
cooled down. Hot suds can damage
plastic drainage pipes.

Top-up rinse takes place when temper-
atures of 95°C and 75°C are selected.

Top-up rinse should be activated:

– to prevent the danger of scalding if

the drain hose is hooked over the
edge of a sink or basin.

– where the drainage pipes do not

comply with DIN 1986.

The washing machine is delivered with
the Top-up rinse for COTTONS deacti-
vated.

Follow steps

to programme

and store in memory.

The programmable functions are acti-
vated with the help of the START button
and the programme selector.

Before you begin, first ensure that:

– The washing machine is switched off.

– The machine is properly closed.

– The programme selector is at

Finish

Press the START button and keep it
pressed in whilst carrying out steps

Switch the machine on with the
I-ON/0-OFF button.

Wait until the START indicator light
comes on . . .

. . . and then release the START but-
ton.

Turn the programme selector to the
COTTONS 40°C position:

If the

Soak/Pre-wash

sequence indica-

tor light:

does not flash

= the Top-up rinse for

Cottons

has not

been activated

flashes

= the Top-up rinse for

Cottons

has been

activated

Press the START button to activate or
deactivate the Top-up rinse for COT-
TONS option.

Switch the machine off with the
I-ON/0-OFF button.

The setting you have selected is now
stored in memory and will remain so un-
til you alter it.

Programmable functions

Summary of Contents for W 320





































































Search results

Summary of Contents for W 320

Reviews:

Related manuals for W 320

Brands by name

Popular brands

Miele W 320, Operating Instructions Manual

Search results

Summary of Contents for W 320

Reviews:

Related manuals for W 320

Brands by name

Popular brands