background image

Fabric conditioners and liquid
starch

Fabric conditioners make garments soft
and fluffy to handle and help prevent
static cling when tumble drying.

Starch stiffens and gives body to items
of laundry, e.g. shirts, tablecloths and
bed linen.

^

Dispense according to the amount
specified on the packaging.

Automatic dispensing of fabric
conditioner or liquid starch to
laundry at the end of a programme

^

Add the fabric conditioner or liquid
starch to compartment

§

.

Do not

exceed the maximum level mark.

The conditioner or liquid starch is
automatically dispensed in the last
rinse. At the end of the programme a
small amount of water remains in the
fabric conditioner compartment

§

.

If starching frequently, the dispenser
compartment and especially the
siphon tube and conditioner channel
will need regular cleaning to remove
any residual starch. See "Cleaning
the detergent dispenser drawer".
Do not add starch formulations or
viscous liquid starch to the

§

compartment as it will clog it up. See
"Adding starch separately".

Adding fabric conditioner separately

^

Add fabric conditioner to
compartment

§

.

^

Turn the programme selector to

Starch

.

^

Select a spin speed.

^

Press the

Start

button.

Adding starch separately

Use the separate

Starch

programme

when using starch formulations or
viscous liquid starch.

^

Prepare and measure the starch in
accordance with the manufacturer’s
instructions.

^

Add starch to compartment

i

.

^

Turn the programme selector to

Starch

.

^

Select a spin speed.

^

Press the

Start

button.

Colour run and dye
removers/dyes

^

Do not use colour run or dye
removers in this washing machine.

^

Dyes suitable for use in domestic
washing machines can be used.
However, please note that the salt
used in the dyeing process can
cause corrosion to stainless steel
components in the machine if you
dye frequently. Always observe the
manufacturer's instructions carefully.

Detergent

30

Summary of Contents for W 304 Plus





































































Reviews: