Miele W 2514 WPS Operating Instructions Manual Download Page 58

Page: 58 / 68

Water plus system

This setting is used to select the
water intake setting for the

Water plus

EXTRA.

There are three different options:

Setting 1 (the machine is delivered with
this option selected)

The water intake is increased in the
wash and rinse stages of the
programmes.

Setting 2:

An additional rinse is introduced in the

Cottons

Minimum iron

Automatic

Quick wash

and

Silks

programmes.

Setting 3:

The water intake is increased in the
wash and rinse stages and an
additional rinse is also introduced in the

Cottons

Minimum iron

Automatic

Quick wash

and

Silks

programmes.

Follow steps

to programme

and store in memory.

Before you begin, first ensure that:

– The washing machine is switched off.

– The machine is properly closed.

Press the

Start/Stop

button and keep

it pressed in whilst carrying out steps

Press the

I-On/0-Off

button in.

Wait until the indicator light for the

Start/Stop

button comes on . . .

. . . and then release the

Start/Stop

button.

– The

Buzzer

indicator light will flash

on and off once.

– A

will flash in the display

alternating with the number

Each subsequent pressing of the

Start/Stop

button will select a

different setting.

The number alternating with the

in the

display refers to the settings as follows:

= Setting 1 is selected

= Setting 2 is selected

= Setting 3 is selected

Switch the washing machine off with
the

I-On/0-Off

button.

The

Water plus

button has now been

allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.

Programmable functions

Summary of Contents for W 2514 WPS





































































Search results

Summary of Contents for W 2514 WPS

Reviews:

Related manuals for W 2514 WPS

Brands by name

Popular brands

Miele W 2514 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 2514 WPS

Reviews:

Related manuals for W 2514 WPS

Brands by name

Popular brands