Miele W 2514 WPS Operating Instructions Manual Download Page 22

Page: 22 / 68

Quick wash cold to 40°C

Fabric type

Very lightly soiled fabrics which can in the

Cottons

programme.

Extra

Water plus

Detergent

Powder detergent, detergent for coloured fabrics, liquid
detergent. See also "Detergent" section.

Max. load

2.5 kg

Automatic cold to 40°C

7621

Fabric type

Mixed loads of garments suitable for the

Cottons

and

Minimum

iron

programmes. Sort according to colour.

Notes

–

For heavy soiling where staining is visible, select

Intensive

Extras

Pre-wash, Soak, Intensive, Water plus

Detergent

Powder detergent, detergent for coloured fabrics, liquid
detergent. See also "Detergent" section.

Max. load

3 kg

Drain / Spin

For spinning fabrics. Please make sure you select the appropriate spin speed.

Drain only: Select

Without spin

. Do not use for woollens.

Separate rinse

Fabric type

Articles which have been washed by hand and only need to be
rinsed and spun in the machine.

Max. load

5.0 kg

Starch

Fabric

Table cloths, napkins, overalls, aprons.

Notes

The laundry should be washed but not treated with fabric
conditioner.

Max. load

5 kg

Programme chart

Summary of Contents for W 2514 WPS





































































Search results

Summary of Contents for W 2514 WPS

Reviews:

Related manuals for W 2514 WPS

Brands by name

Popular brands

Miele W 2514 WPS, Operating Instructions Manual

Search results

Summary of Contents for W 2514 WPS

Reviews:

Related manuals for W 2514 WPS

Brands by name

Popular brands