Miele W 1714 Page 21 Operating Instructions Manual Download

Page: 21 / 64

Automatic

7621

cold to 40°C

Max. load 3.5 kg

Fabric

Mixed loads of garments suitable for the

Cottons

and

Minimum

iron

programmes. Sort according to colour.

Note

The wash parameters (e.g. water level, wash rhythm and spin
speed) are adjusted automatically in this programme to ensure
the best possible care and wash result for each item.

Shirts

cold to 60°C

Max. load 2.0 kg

Notes

– Pre-treat collars and cuffs if necessary.

– Use the

Delicates

programme for machine-washable silk

garments and the

Woollens

programme for hand-washable silk

garments.

Extra options Short, Water plus

Denim

cold to 60°C

Max. load 3.0 kg

Notes

– Wash denim inside out.

– Denim often contains excess dye and will run during the first

few washes. Wash light and dark coloured items separately.

Extra options Short, Pre-wash

Dark garments

cold to 40°C

Max. load 3.0 kg

Fabric

Dark garments made from cotton or mixed fibres.

Note

Wash inside out.

Extra option

Short

Spin

Notes

– Make sure you select the appropriate spin speed.

– Drain only: Select

* Please note that the "buckets" represent garment care label symbols. See

"Garment care label symbols".

Programme chart

Summary of Contents for W 1714

































































Search results

Summary of Contents for W 1714

Reviews:

Related manuals for W 1714

Brands by name

Popular brands

Miele W 1714, Operating Instructions Manual

Search results

Summary of Contents for W 1714

Reviews:

Related manuals for W 1714

Brands by name

Popular brands