Miele W 1714 Page 57 Operating Instructions Manual Download

Page: 57 / 64

Code

A code can be used to lock the
electronics on the washing machine
to prevent it being used without your
knowledge.

When the code has been activated, you
have to enter a code after switching the
washing machine on. Otherwise the
washing machine cannot be operated.

Code ...

Press the

Start/Stop

button.

To activate the code

Activate

Press the

Start/Stop

button.

The display will now request that a
code is entered.

To enter the code

The code is

125

and cannot be altered.

__ __

Turn the programme selector until the
first number appears in the display.

Confirm your selection of the number
by pressing the

Start/Stop

button.

Repeat the process until all three
numbers have been entered.

Press the

Start/Stop

button.

The following will appear in the display:

Code activated

Once the machine is switched off, it
can only be used again if the code is
entered.

To use the washing machine when
the code is activated

When the machine is switched on
again, the display will request the code.

Enter code 125 as described above
and confirm the entry.

The washing machine is now unlocked
and ready for use.

To deactivate the code

Make sure the washing machine is
switched off and the door is properly
closed. Press the

Start/Stop

button and

keep it pressed in whilst you press the

l-On/0-Off

button in.

As soon as . . .

__ __

. . . appears in the display, release

the

Start/Stop

button.

Now enter the code and press the

Start/Stop

button.

Select

Code

and confirm

Deactivate

Programmable functions

Summary of Contents for W 1714

































































Search results

Summary of Contents for W 1714

Reviews:

Related manuals for W 1714

Brands by name

Popular brands

Miele W 1714, Operating Instructions Manual

Search results

Summary of Contents for W 1714

Reviews:

Related manuals for W 1714

Brands by name

Popular brands