The wash programme stops and a fault indicator light comes
on.
Problem
Possible cause
Remedy
A
The Check drain light
flashes.
The water outlet is
blocked.
Clean the fluff filter and the
drain pump as described in
"Problem solving guide –
Opening the lid in the event
of a blocked water outlet
and/or a power failure".
The drain hose has
been fixed too high.
The maximum drain height is
1 m.
The Check inlet light
flashes.
The water inlet is
blocked.
Open the stopcock.
The filter in the water
inlet hose is dirty
Clean the filter.
The Soak/Pre-wash or
Rinses indicator light
is flashing.
There is a fault.
Start the programme again. If
the fault indicator occurs
again, contact the Miele Ser-
vice Dept.
A
To switch off the fault indicator: turn the washing machine off with the
I-ON/0-OFF
button and turn the programme selector to
Finish
.
Problem solving guide
38
