Important control panel
features
Programme selector
The programme selector is used to set
the basic wash programme and the
temperature for that programme.
Additional option buttons
Additional options can be added to the
basic programme.
Use the top button to select either the
Intensive
, the
Pre-wash
or the
Soak
option or a combination of these
options.
Use the lower button to select the
Water
plus
option.
The indicator light will come on to show
that the additional option has been
selected.
If an additional option is chosen, which
is incompatible with the basic
programme, it cannot be selected.
"Spin" button with indicator lights
Selecting the spin speed
The maximum spin speed which can be
selected depends on the basic
programme chosen.
Maximum
spin
speed
Basic programme
1200 Cottons, Woollens, Quick wash,
Starch, Separate rinse,
Drain/spin
900 Minimum Iron, Mixed wash
600 Delicates
400 Silks
Press the "Spin" button to select a
different spin speed. N.B.: you cannot
select a spin speed higher than the
maximum allowed for the basic wash
programme chosen.
The indicator lights show the speed
selected.
You can also omit the spin.
^
Press the "Spin" button to reach:
– Rinse hold
The laundry is not spun and remains
suspended in the final rinse water.
This reduces creasing if the laundry
is not going to be removed from the
drum immediately after the end of
the programme.
To continue the programme select a
spin speed. If you want to cancel the
programme: press the
Lid
button, so
that the machine starts to drain.
When the water has drained away,
press the
Lid
button again.
– Without spin
The laundry is not spun after the final
rinse. Spinning between the rinses is
also omitted in this setting (rinse and
interim spin).
Description of the appliance
12
