Miele W 1113, Technical Information

Page: 18 / 88

Technical Information
12
W1113, W1119, W1203, W1213 & W1215 Clothes Washers
4 Service
4.1 Lid - Removal
1. Remove the screw caps from the lid side edges.
2. Loosen the lid screws about 4 to 5 turns – max. Do not
completely remove the screws.
3. Press the screws in to release the retaining tabs. Lift the lid at
the front, slide it to the rear and lift from appliance to remove.
4.2 Plinth (Toekick) - Removal
1. From the bottom of the toekick, apply pressure upward
2. Pull the toekick away from the appliance.
4.3 Front Panel - Removal
1. Remove the Plinth (010 4.2)
2. Open the door.
3. Remove the clamping ring, that secures the sealing to the front
cover.
4. Unfasten the sealing ring and fold it back towards the drum.
5. Remove the Door Lock screws.
6. Remove the 10mm Bolt.
7. Close the door.
8. Remove the two screws from the bottom corners of the front
panel.
9. Hold the sides of the front panel, tilt the bottom edge forwards
and pull gently to release it from the plastic lugs on the Control
Panel Frame.
10. Lift the panel away from the front of the appliance.