background image

Extended drying

If the desired drying results are not
consistently achieved, the turbothermic
cooling fan can be programmed to run
an extra 14 minutes at the end of each
program.

The "Extended drying" feature can also
be activated to prevent condensation
from collecting on the steam deflector.

Turning extended drying on/off

^

Turn off the dishwasher.

^

Press and hold the "Top Solo" (20)
and "Start/Stop" (18) buttons. At the
same time turn the dishwasher on
using the "On/Off" button.
Release all buttons.

The time display will show

A00

. The

"Salt" (15) indicator will flash and the
"Pre-wash" (16) indicator will light.

^

Press the "Top Solo" button (20).

The time display will go out, the "Salt"
(15) indicator will flash and the "End"
(16) indicator will light.

If this is not the case, the above steps
must be repeated.

The extended drying time is

off

if the

top program indicator

flashes

.

The extended drying time is

on

if the

top program indicator

lights

.

If the the correct drying time is set:

^

Turn off the dishwasher.

If the drying time is incorrect:

^

Press the "Top Solo" button (20).

^

Press the "Start/Stop" button (18).

SP

for "Save" will appear in the time

display.

^

Press the "Start/Stop" button again.

The "Start/Stop" (18) indicator will flash.

The changed extended drying option is
now stored.

^

Turn off the dishwasher.

Operation

38

Summary of Contents for ULTRA FULLSIZE DISHWASHER

























































Reviews: