Miele TWV 780 WP Operating Instructions Manual Download Page 54

Page: 54 / 112

Changing the programme sequence

Changing a programme once it
has started

You cannot change to another pro-
gramme once a programme has started
(this prevents unintentional alterations).

You will need to cancel the current pro-
gramme before you can select a new
one.

Cancelling a programme



Touch the

Start/Stop

sensor.

The following will appear in the display:



Cancel the programme?



Select

Yes

The following appears in the display:

Programme cancelled



Open the door.

Selecting another programme



Close the door.



Select the programme you want.



Touch the

Start/Stop

sensor.

Adding or removing laundry

You have forgotten something but the
programme is already running.



Touch the

Add laundry

sensor control.

Add laundry

and

The door can be opened.

appears in the display. The

Start/Stop

sensor control flashes slowly.



Open the door.



Add or remove laundry items.



Close the door.



Touch the

Start/Stop

sensor control.

The programme continues.

Exceptions when adding laundry

In some cases, for example, during
the cooling phase or the

Proofing

pro-

gramme, it is not possible to add laun-
dry items.

In exceptional cases, the door can be
opened while the programme is run-
ning.

Summary of Contents for TWV 780 WP

















































































































Search results

Summary of Contents for TWV 780 WP

Reviews:

Related manuals for TWV 780 WP

Brands by name

Popular brands

Miele TWV 780 WP, Operating Instructions Manual

Search results

Summary of Contents for TWV 780 WP

Reviews:

Related manuals for TWV 780 WP

Brands by name

Popular brands