Miele TWV 780 WP Operating Instructions Manual Download Page 52

Page: 52 / 112

Timer

The timer can be used to set the time
you wish a programme to finish or start
at. The programme start can be delayed
by up to 24 hours.

Setting the timer



Touch the



Timer sensor.



Select the

Finish at

Start at

option.



Set the hours and the minutes with
the

sensor.

Changing the timer

The selected timer can be changed be-
fore the programme starts.



Touch the





sensor.



Change the specified time and con-
firm with the

sensor.

Deleting the timer

The selected timer can be deleted be-
fore the programme starts.



Touch the





sensor control.

The selected delay start period will ap-
pear in the display.



Touch the

Delete

sensor control.



Confirm with the

sensor control.

The selected delay start period is de-
leted.

Starting the timer



Touch the

Start/Stop

sensor.

The time until the programme starts will
appear in the display.

After the programme has started, the
selected delay start time can only be
changed or cancelled by interrupting
the programme.

The programme can now be started.



Touch the

Start immediately

sensor.

Adding laundry during ongoing delay
start period



Follow the description in “Changing
the programme sequence – Adding or
removing laundry”.

With a longer delay start time, the drum
will rotate occasionally to untangle the
laundry. This is not a fault.

Summary of Contents for TWV 780 WP

















































































































Search results

Summary of Contents for TWV 780 WP

Reviews:

Related manuals for TWV 780 WP

Brands by name

Popular brands

Miele TWV 780 WP, Operating Instructions Manual

Search results

Summary of Contents for TWV 780 WP

Reviews:

Related manuals for TWV 780 WP

Brands by name

Popular brands