Miele TWV 780 WP Operating Instructions Manual Download Page 101

Page: 101 / 112

Settings

101

Memory

The dryer saves the settings that were
selected last for a drying programme
(drying stage and/or extra option, or
the duration for some programmes).

When the programme is chosen again,
the saved settings will appear in the
display.

Options

Off

(factory default)

Volume

The volume can be changed for the
buzzer that sounds when the dryer is
switched on and at the end of the pro-
gramme. The volume of the tone that
sounds when a sensor is touched can
also be changed.

Options

Finish tone

Keypad tone

Welcome tone

It can be set to one of 7 different set-
tings or switched off altogether.

Display brightness

The brightness of the display can be
altered.

It can be set to one of 7 different set-
tings.

Factory default: a medium setting

Wash2Dry

You can deactivate the

Wash2Dry

function.

Options

- On (factory default)



Wash2Dry is enabled and lights

up in the main menu.

- Off



Wash2Dry does not light up.

Summary of Contents for TWV 780 WP

















































































































Search results

Summary of Contents for TWV 780 WP

Reviews:

Related manuals for TWV 780 WP

Brands by name

Popular brands

Miele TWV 780 WP, Operating Instructions Manual

Search results

Summary of Contents for TWV 780 WP

Reviews:

Related manuals for TWV 780 WP

Brands by name

Popular brands