Miele TCR 860 WP Operating Instructions Manual Download Page 80

Page: 80 / 104

Installation

*INSTALLATION*

Optional accessories

– Building-under kit

A building under kit is required if the
lid of the tumble dryer needs to be
removed in order to build it under a
worktop.
It must be installed/dismantled by a
suitably qualified fitter.

The cover plate included in the build-
ing-under kit replaces the appliance's
lid. The cover plate has to be fitted for
electrical safety!

Fitting instructions are supplied with the
building-under kit.

– Washer-dryer stack

The tumble dryer can be combined with
a Miele washing machine in a washer-
dryer stack. The appropriate Miele
washer-dryer stacking kit is required.

– Plinth

The tumble dryer can be fitted on a
plinth with drawer (please note the
plinth may not be available in all coun-
tries).

Summary of Contents for TCR 860 WP









































































































Search results

Summary of Contents for TCR 860 WP

Reviews:

Related manuals for TCR 860 WP

Brands by name

Popular brands

Miele TCR 860 WP, Operating Instructions Manual

Search results

Summary of Contents for TCR 860 WP

Reviews:

Related manuals for TCR 860 WP

Brands by name

Popular brands