Miele TCJ 690 WP Operating Instructions Manual Download Page 45

Page: 45 / 92

Changing the programme sequence

Changing a programme after it
has started

You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).

If you try to change the current
programme,



Cannot be changed

lights

up until the original programme is reset.
Exception: You can switch the dryer off
by turning the programme selector to
the



position.

You will need to cancel the current
programme before you can select a
new one.



Risk of fire due to incorrect use

and operation.
The laundry can burn and destroy
the dryer and the surroundings.
See “Warning and Safety
instructions” for further information.

Cancelling a programme



Touch the

Start/Stop

sensor.

Cancel programme

lights up.



Confirm with the

sensor.

Finish/Cooling down

will light up in the

display, depending on the drying
duration and the drying temperature
reached.

The following appears in the display:

Programme cancelled



Open the door.

Selecting another programme



Close the door.



Turn the programme selector to a
different programme.



Touch the

Start/Stop

sensor.

Adding or removing laundry



Risk of burning when touching

hot laundry in the drum!
You could burn yourself.
Let the laundry cool down and
remove it carefully.



Pull open the door.



Add or remove items.



Close the door.



Touch the

Start/Stop

sensor.

The programme will start.

Summary of Contents for TCJ 690 WP





























































































Search results

Summary of Contents for TCJ 690 WP

Reviews:

Related manuals for TCJ 690 WP

Brands by name

Popular brands

Miele TCJ 690 WP, Operating Instructions Manual

Search results

Summary of Contents for TCJ 690 WP

Reviews:

Related manuals for TCJ 690 WP

Brands by name

Popular brands