Miele TCJ 690 WP, Operating Instructions Manual

Page: 34 / 92

5. Starting the programme
34
Starting a programme

Touch the flashing Start/Stop sensor.
The Start/Stop sensor will light up and
Drying appears in the display.
Notes
If a Delay start time has been selected,
it will count down in the time display. At
the end of the Delay start time or
immediately after the programme has
started (if no Delay start time has been
selected), the programme duration will
appear in the time display.
With a longer Delay start time, the drum
will rotate occasionally to untangle the
laundry. This is not a fault.
– The Perfect Dry indicator will only
flash/light up with programmes with
selectable drying levels (see also
“Operating the tumble dryer”).
– The dryer measures the residual
moisture of the laundry and
calculates the required programme
duration.
If a small load or dry laundry is
placed in the dryer, it is dried/aired
for a preset duration. In this case the
Perfect Dry indicator does not light
up at the end of the programme.
Laundry items and fabrics can wear
out unnecessarily.
Avoid over-drying laundry and
garments.
The drying level reached for the
selected drying programme will light up
in the display.
You can view the selected drying level
or time again:

Touch the

or

sensor.
– Before the programme finishes, the
laundry is cooled.
Energy savings
After 10 minutes, the indicators dim and
the
Start/Stop sensor starts flashing.

Touch the Start/Stop sensor to switch
the indicators on again (this does not
have any effect on a running
programme).
The drum lighting switches off once the
programme has started.