Installation and connection
60
Examples
– Drainage into a sink or floor gully
Use the hose holder to prevent the
drain hose from becoming kinked.
Press the small catches on the left
and right of the hose holder with your
thumbs (black arrows) and ...
... pull the hose holder forwards to
remove it (white arrows).*
If you want to drain the water off
into a sink or basin, you will need to
secure the hose carefully, e.g. by
tying it to a tap, to make sure it
cannot slip during use (see the
drawing under "Installation and
connection - Front view").
Overflowing water can cause
damage.
The non-return valve can be fitted in
the end of the hose.
* You can refit the hose holder at a
later stage if you decide that you no
longer want to drain the condensed
water externally.
Direct connection to a sink drain
outlet
Remove the following from the back
of the dryer at the top: Adapter
1
and
hose clip
3
behind it.
Connect the drain hose as described
below.
