Miele T 8947 WP Operating Instructions Manual Download Page 28

Page: 28 / 64

Woollens

Max. load 2 kg*

Fabric type Woollen fabrics. Fabrics containing wool blends.

Notes

– This programme only fluffs up woollen garments. They are not

dried completely.

– Remove garments as soon as the programme has finished and

leave to finish drying at room temperature.

Silks

Max. load 1 kg*

Fabric type Silks (suitable for drying in a tumble dryer), e.g. blouses and shirts.

Notes

– Smooths out creasing.

– Remove garments as soon as the programme has finished.

Express

Max. load 3.5 kg*

Extra dry, , Normal, Hand iron

, Hand iron

, Machine iron

Fabric type Fabrics which can tolerate high temperatures and which can be

dried using the

Cottons

programme.

Note

– The programme duration is shorter.

Gentle smoothing

Max. load 1 kg*

Fabric type – Cotton and linen fabrics.

– Minimum iron items made of mixed fibres, cottons or synthetics,

e.g.: trousers, anoraks, shirts.

Notes

– Smooths out creasing caused during the spin cycle in the

washing machine.

– Remove garments as soon as the programme has finished so

that they are easy to iron.

* Weight of dry laundry

Programme chart

Summary of Contents for T 8947 WP

































































Search results

Summary of Contents for T 8947 WP

Reviews:

Related manuals for T 8947 WP

Brands by name

Popular brands

Miele T 8947 WP, Operating Instructions Manual

Search results

Summary of Contents for T 8947 WP

Reviews:

Related manuals for T 8947 WP

Brands by name

Popular brands