Miele T 8947 WP, Operating Instructions Manual

Page: 20 / 64

Brief instructions
The headings numbered (
A
,
B
,
C
...)
show the operating sequence and can
be used as a brief guide to using your
dryer.
A
Sort the laundry
To ensure an even drying result,
separate out the washed laundry and
sort it according to:
. . . the drying level required
. . . the type of fibre or weave
. . . size
. . . the moisture content after spinning.
,
Make sure that objects e.g.
detergent dispensing balls have
been removed from the laundry.
They could melt, and cause damage
to the dryer or the laundry.
– Remove all objects from pockets
such as lighters and matches.
– Check seams and stitching to ensure
that padding and linings are intact.
– Fasten duvet covers and pillow
cases to prevent small items from
being trapped inside them.
– Fasten zips, hooks and eyes etc.
– Tie fabric belts and apron strings.
– Sew in or remove underwiring from
bras.
B
Turn on the tumble dryer
^
Switch the dryer on by pressing the
s
button in.
The tumble dryer may be switched on
after loading, saving energy as the light
will not come on.
C
Load the tumble dryer
^
Press the Door button to open the
door.
^
Load the laundry loosely into the
drum.
Do not overload the drum. See the
"Programme chart" for
recommended loads for each
programme.
Overloading can cause unnecessary
wear and tear to the laundry and
give a disappointing drying result.
^
Before closing the door, make sure
the fluff filter is correctly positioned in
the door.
Check the laundry is right inside the
drum so that it cannot get trapped or
damaged when the door is shut.
^
Shut the door either with a gentle
swing, or lean against it and push it
shut.
How to dry correctly
20