Miele SoftTronic W 418 Operating Instructions Manual Download Page 9

Page: 9 / 68

Special programmes

– Programme for hand-washable

fabrics (Silks

)

Hand-washable fabrics which crease
easily and do not contain wool can
be washed in the

Silks

programme (30°C temperature only).

– Programme for hand-washable

fabrics (Woollens

)

Hand-washable or
machine-washable wool or wool
blend fabrics can be washed in the

Woollens

programme. If the

garment care label does not specify
a temperature, wash using the cold
setting.

– Programme for small loads

(Quick wash)

This is a Cottons programme for very
lightly soiled fabrics.

– Programme for mixed fabrics

(Mixed wash)

Suitable for small loads of garments
made from man-made fibres and
cotton garments which can be
washed together. Sort according to
colour.

– Rinse programme (Separate rinse)

Articles are only rinsed and spun in
the machine.

Delicates and Silks

programmes

In these programmes, the laundry is
washed and spun very gently to reduce
creasing and the amount of ironing
required, thus providing "Easy care" for
your laundry.

Water plus system

The water level for washing and/or
rinsing is increased. For

Cottons

and

Minimum iron

programmes an

additional rinse can also be selected.

Description of the appliance

Summary of Contents for SoftTronic W 418





































































Search results

Summary of Contents for SoftTronic W 418

Reviews:

Related manuals for SoftTronic W 418

Brands by name

Popular brands

Miele SoftTronic W 418, Operating Instructions Manual

Search results

Summary of Contents for SoftTronic W 418

Reviews:

Related manuals for SoftTronic W 418

Brands by name

Popular brands