en
61
Unclip the cover.
Remove the front wheel.
Remove any threads and hair and
clean the front wheel, the cover and
the slot depression using the cleaning
tool.
Refit the front wheel and close the
cover making sure it clicks into posi-
tion.
Cleaning the sensors
Clean the sensors as required.
Place the robot vacuum cleaner up-
side down on a level, clean surface.
Clean the sensors carefully using a
dry cotton wool bud.
Keep batteries out of the reach
of children.
A swallowed battery can cause injury
and even death. Even flat batteries
can still be dangerous. If you suspect
a child has swallowed a battery, seek
medical advice immediately*. Exam-
ine devices and make sure the bat-
tery compartment is correctly se-
cured, e.g. that the screw or other
mechanical fastener is tightened. Do
not use if compartment is not secure.
* Australia: Poisons Information
Centre, Tel. 13 11 26;
NZ: National Poisons Centre,
Tel. 0800 764 766
Replacing batteries in the remote
control
The remote control requires two 1.5 V
(AAA) batteries.
Remove the battery compartment
cover.
Replace the batteries. Take care with
the polarity.
Close the battery compartment cover.
Observe the special instructions re-
garding the handling and disposal of
batteries found in the sections “Warn-
ing and Safety” and “Caring for the
environment” at the beginning of
these operating instructions.
Downloaded from www.vandenborre.be
