en
58
Close the storage compartment lid
and press down on the depression in
order to lock it.
Cleaning the dust box
Clean the dust box as required.
A cleaning tool is located at the top of
the dust box lid.
Remove the cleaning tool.
Clean the dust box and the underside
of the lid using the cleaning tool.
Cleaning the exhaust filter
Clean the exhaust filter as required.
The exhaust filter compartment is loc-
ated in the dust box.
Remove the lid from the dust box.
Fold out the filter unit from the dust
box.
Remove the pre-filter and clean it as
required using the cleaning tool.
Unlatch the exhaust filter, remove it
and clean it using the cleaning tool.
Refit the exhaust filter into the cover.
Place the pre-filter onto the exhaust
filter.
The filter unit is complete.
Carefully refit the filter unit and clip it
into position.
The exhaust filter must be replaced
with a new one after approx. six
months in order to achieve the best
possible cleaning results.
Cleaning the side brushes
Clean the side brushes as required. For
this you will require the cleaning tool
which is located at the top of the dust
box lid.
Place the robot vacuum cleaner up-
side down on a level, clean surface.
Using both hands take hold of two
opposite elastic side brush holders
and pull them upwards to remove
them.
Downloaded from www.vandenborre.be
