When to change the thread
catcher pads
Check the thread catchers on the suc-
tion inlet of the floor brush and the up-
holstery nozzle from time to time. Re-
place them if the pile is worn.
Replacing the thread catchers
^
Use a screwdriver or similar object to
remove them from the slots.
^
Insert the new thread catchers.
Servicing the floor roller
a
Use a coin to release the roller pin
(bayonet connection), and pull out the
pin.
b
Take out the roller.
Remove all threads and hair etc, then
reassemble the parts in the correct or-
der.
Spare parts are available from your
Miele dealer or from the Miele Parts De-
partment.
Maintenance and care
37
