Miele PWM 916 SD, Installations Plan

Page: 50 / 152

en - Technical data
50
Direct steam heating
Heater rating (peak capacity high pressure) 37 kW
Threaded union (on site) 1 x
½
"
Steam solenoid valve, dirt filter and steam shut-off valve must be installed by the customer on site. Follow the installation instructions
for steam-heated machines.
Drainage
Maximum drain water temperature 95 °C
Waste water connection (on machine) Plastic pipe HT DN 70
Drain (on site) Connection DN 70
Maximum drainage rate 200 l/min
Connection for equipotential bonding
Male thread M10
Toothed washers M10
Installation dimensions
Casing width (without add-on components) 920 mm
Casing height (without add-on components) 1447 mm
Casing depth (without add-on components) 754 mm
Overall machine width 924 mm
Overall machine height 1450 mm
Overall machine depth 846 mm
Minimum width of transport opening 1020 mm
Minimum safety distance between wall and appliance front 1280 mm
Diameter of door opening 415 mm
Door opening angle 180°
Anchoring
Standard
Required anchor points 2
DIN 571 wood screw (diameter x length) 12 mm x 90 mm
Rawl plugs (diameter x length) 16 mm x 80 mm
With plinth (APWM UO/UG)
Required anchor points 4
DIN 571 wood screw (diameter x length) 12 mm x 90 mm
Rawl plugs (diameter x length) 16 mm x 80 mm
Concrete plinth
Required anchor points 2
DIN 571 wood screw (diameter x length) 12 mm x 90 mm
Rawl plugs (diameter x length) 16 mm x 80 mm