Miele PWM 908 Operating And Installation Instructions Download Page 65

Page: 65 / 104

Problem solving guide

The door will not open

Problem

Cause and remedy

The door cannot be
pulled open during a
programme.

The door is locked during the wash programme.



Touch the

Start/Stop

sensor control.



Select

Cancel programme

Add laundry

The door will unlock and you will be able to pull it
open.

There is still water in the drum and the machine is un-
able to drain.



Clean the drainage system as described under
“Opening the door in the event of a blocked drain
outlet and/or power cut”.

At the end of a pro-
gramme or when a pro-
gramme is cancelled,
the following appears in
the display:

Cooling down

Comfort

cooling

To protect the user against scalding, the door cannot
be opened if the suds temperature is higher than
55 °C.



Wait until the temperature in the drum has de-
creased and the message has gone out in the dis-
play.

The following appears
in the display:



The door lock is jammed.

Call Service.

The door lock has jammed.



Call Miele Service.

Summary of Contents for PWM 908









































































































Search results

Summary of Contents for PWM 908

Reviews:

Related manuals for PWM 908

Brands by name

Popular brands

Miele PWM 908, Operating And Installation Instructions

Search results

Summary of Contents for PWM 908

Reviews:

Related manuals for PWM 908

Brands by name

Popular brands