Miele PWM 507 Operating And Installation Instructions Download Page 26

Page: 26 / 80

3. Selecting a programme

Switching on the washing
machine



Press the



button.

The interior drum lighting will come on.

The drum lighting will go out
automatically after five minutes or after
the programme start.

Selecting a programme

Selecting standard programmes with
the programme selector



Turn the programme selector to the
required programme.

The selected programme will be shown
in the display. The display will then
change to the main menu for that
programme.

Selecting special programmes



Turn the programme selector to the



position.

You can select the required programme
via the display.



Hygiene

progs





 Disinfection
RKI 85° 15 min

Disinfection 71°



Touch the





sensor until the

programme you want appears in the
display.



Touch the sensor for that programme.

The display will change to the main
menu for that programme.

Summary of Contents for PWM 507

















































































Search results

Summary of Contents for PWM 507

Reviews:

Related manuals for PWM 507

Brands by name

Popular brands

Miele PWM 507, Operating And Installation Instructions

Search results

Summary of Contents for PWM 507

Reviews:

Related manuals for PWM 507

Brands by name

Popular brands