Miele PWM 507 Operating And Installation Instructions Download Page 15

Page: 15 / 80

Operating the washing machine

Control panel



language sensor

For selecting the current user
language.
The operating language is displayed
again at the end of the programme.

Touch display with sensor controls

Displays the selected programme.
The programme settings are selected
using the sensors in the touch
display.



back sensor

Takes you back one level in the
menu.

Start/Stop sensor

For starting the selected programme
and cancelling a programme that has
already started.

Programme selector

For selecting the wash programme.
The programme selector can be
turned clockwise or anti-clockwise.



button

For switching the washing machine
on and off.
The washing machine switches itself
off automatically to save energy. This
occurs 15 minutes after the end of
the programme/anti-crease phase, or
after being switched on if no further
selection is made.

Summary of Contents for PWM 507

















































































Search results

Summary of Contents for PWM 507

Reviews:

Related manuals for PWM 507

Brands by name

Popular brands

Miele PWM 507, Operating And Installation Instructions

Search results

Summary of Contents for PWM 507

Reviews:

Related manuals for PWM 507

Brands by name

Popular brands