background image

Washing

26

Changes before starting the programme

Changes can be made before the start of the programme, e.g. load,
temperature or spin speed:

Load size

The load size can be entered manually before the start of the pro-
gramme.

1

Main wash

Cottons hygiene

Pre-wash

°C

90

10,0

+

40°C

24,0 kg

Rotate the rotary control to select the “Load size” entry field and
press the rotary control to confirm the selection.

Rotate the rotary control to change the load size and press the
rotary control to confirm the set value.

Temperature

Before the programme starts, the temperature can be set in 1 °C in-
crements from cold 15 °C to the max. 95 °C.

Rotate the rotary control to select the “Temperature” field (e.g.
40 °C for the pre-wash) and press the rotary control to confirm the
selection.

1

Main wash

Cottons hygiene

Pre-wash

°C

90

10,0 / 24,0

+

40°C

kg

Rotate the rotary control to change the temperature and press the
rotary control to confirm the set value.

Spin speed

in 25 rpm increments from 0, 300 up to a maximum of 1100 rpm
(PW 6241) or 1000 rpm (PW 6321).

Rotate the rotary control to select the “Spin speed” field (1000 rpm
for the final spin) and press the rotary control to confirm the selec-
tion.

1

Main wash

Cottons hygiene

Rinses

°C

90

10,0 / 24,0

+

1000

kg

rpm

Rotate the rotary control to change the spin speed and press the
rotary control to confirm the setting.

Maximum spin
speeds

PW 6241

PW 6321

1100 rpm

1000 rpm

Press the “START” button to start the wash programme.

Summary of Contents for PW 6241









































































Reviews: