Miele PW 6065 OS Operating And Installation Instructions Download Page 75

Page: 75 / 80

No. of programmes

You can extend the number of
programmes available.

0 additional programmes (the machine
is delivered with this option selected).

6 additional programmes (

Intensive

wash 60°C

Intensive wash 40°C

Table

linen

Pillows

Curtains

and

Kitchen

linen

2 additional programmes (

Outerwear

and

Proofing

8 additional programmes (all the above
named programmes).

Target groups

This option is visible in the display
but not available on this machine.

Pre-wash

You can choose for pre-wash to be
carried out with every

Cottons

hygiene

Cottons universal

and

Minimum iron

programme or to select

it each time via the

Extras

menu.

The machine is delivered with the

Select via prog. menu

option activated.

No. rinses Cottons

You can alter the number of rinses
which are carried out in the

Cottons

hygiene

and

Cottons universal

programmes.

2 rinses (factory default setting)
3 rinses
4 rinses
5 rinses

No. rinses Min. iron

You can alter the number of rinses
which are carried out in the

Minimum

iron

programme.

2 rinses (default setting)
3 rinses
4 rinses

No. rinses Disin.

This option is visible in the display
but not available on this machine.

Pre-rinse Cottons

A pre-rinse can be carried out in the

Cottons hygiene

and

Cottons

universal

programmes.

The machine is delivered with this
option deactivated.

Settings/Supervisor level menu

Summary of Contents for PW 6065 OS

















































































Search results

Summary of Contents for PW 6065 OS

Reviews:

Related manuals for PW 6065 OS

Brands by name

Popular brands

Miele PW 6065 OS, Operating And Installation Instructions

Search results

Summary of Contents for PW 6065 OS

Reviews:

Related manuals for PW 6065 OS

Brands by name

Popular brands