Pre-wash water
You can choose for the pre-wash to
be carried out with either hot or cold
water (not available with the
Curtains
programme). Hot water can only be
only taken in if the wash temperature
is above 30°C.
The setting is confirmed when the
machine is commissioned.
Main wash water
You can choose for the main wash to
be carried out with either hot or cold
water (not available with the
Woollens
,
Curtains
and
Proofing
programmes). Hot water can only be
only taken in if the wash temperature
is above 30°C.
The setting is confirmed when the
machine is commissioned.
The machine will need to be set up
specifically for
Recycled water
if this
option is selected.
Rinse water
You can choose for the rinses in the
Cottons hygiene
,
Cottons universal
,
Minimum iron
and
Kitchen linen
programmes to be carried out with
either hot or cold water. Hot water
can only be only taken in if the wash
temperature is abpve 50°C.
The machine is delivered with the
Cold
water option selected.
The machine will need to be set up
specifically for
Recycled water
if this
option is selected.
Low water pressure
This setting can be activated to
ensure problem free water intake
where the water pressure is
constantly low (below 100 kPa).
The machine is delivered with this
option deactivated.
Empty sensor
You can activate the
Empty sensor
option for the external liquid
detergent containers so that a
message appears in the display
when a container is empty.
The factory default setting is
No
(no
empty sensor).
Settings/Supervisor level menu
73
