Miele PW 6055 Operating And Installation Instructions Download Page 65

Page: 65 / 72

No. of programmes

You can extend the number of
programmes available.

0 additional programmes (the machine
is delivered with this option selected).

4 additional programmes (

Table linen

Pillows

Curtains

and

Kitchen linen

2 additional programmes (

Outerwear

and

Proofing

6 additional programmes (all the above
named programmes).

Quick wash

The

Quick wash

programme can be

activated.

The machine is delivered with the

Quick

wash

programme deactivated.

Hygiene

This option is visible in the display
but not available on this machine!

Sluice

This option activates the additional
sluice programmes.

The machine is delivered with the
option deactivated.

N.B. This option is only suitable for use
on machines fitted with a dump valve. It
must not be activated on machines
fitted with a drain pump.

Disinfection

This option is visible in the display
but not available on this machine!

Pre-wash

You can choose for pre-wash to be
carried out with every

Cottons

hygiene

Cottons universal

and

Minimum iron

programme or to select

it on an individual basis via the Extras
menu.

The machine is delivered with the
option to select the pre-wash from the

Menu

activated.

Settings/Supervisor level menu

Summary of Contents for PW 6055









































































Search results

Summary of Contents for PW 6055

Reviews:

Related manuals for PW 6055

Brands by name

Popular brands

Miele PW 6055, Operating And Installation Instructions

Search results

Summary of Contents for PW 6055

Reviews:

Related manuals for PW 6055

Brands by name

Popular brands