Miele PW 6055, Operating And Installation Instructions

Page: 13 / 72

Before using the machine for the first time ensure that it is
correctly installed and connected. See "Installation and
connection". Also check that the drain filter is securely
tightened to prevent the risk of water leaks during use.
For safety reasons spinning is not possible until the machine
has been prepared for using for the first time. To activate the
spinning function you must run a wash programme without
laundry and without detergent.
^
Open the stopcocks.
Welcome screen
When the washer-extractor is switched on for the first time, a
welcome screen will appear.
Miele Professional Welcome.
The welcome screen will not appear again after the first
programme has been completed.
After four seconds the display will change to the screen for
setting the language.
Language
J
^
Select the language you want and confirm your selection.
Reminder to remove transport struts
The machine will remind you to remove the transport struts.
^
Remove the transport struts (if this has not already been
done by your fitter). Then press the multi-function selector
to confirm that this has been done.
Before using for the first time
13