Miele PW 6055, Operating And Installation Instructions

Page: 18 / 72

F
Start the programme
The Start button will flash as soon as a
programme can be started.
^
Press the Start button.
The Start button will light up.
The estimated programme duration will
appear in the display. This will count
down in one minute steps. During the
first 10 minutes the machine measures
how much water is being absorbed by
the laundry. The programme duration
may be shorter depending on this
absorbency rate.
The programme sequence is also
shown in the display. The
washer-extractor shows you when each
section of the programme is reached.
The drum lighting switches off once the
programme has started.
G
Remove the laundry
Only remove laundry from the
machine once the drum has
stopped turning. Reaching into a
moving drum is extremely
dangerous and could result in injury.
If laundry is not removed immediately
the programme has finished, the
anti-crease phase will begin and the
drum will turn at intervals to help
prevent creasing.
Anti-crease will flash alternately with
Finish in the display to indicate that the
programme has finished.
^
Press the
a
button to open the
drum door.
^
Remove the laundry.
Check that all items have been
removed from the drum. Items left in
the drum could discolour other items
in the next wash or become
discoloured themselves.
^
Check the folds in the door seal for
any small articles, e.g. buttons which
might be lodged there.
^
Close the drum door. Otherwise there
is the danger of objects being placed
inadvertently in the drum. If these
remained unnoticed and were
washed in the next load, they could
damage the laundry.
How to wash correctly
18