Miele PW 5105 Vario Operating And Installation Instructions Download Page 12

Page: 12 / 60

Display

Entry menu

1 Cottons Uni.

60°C

Programme selection...

2 Minimum iron

40°C

Settings

...

3 Delicates

40°C

4 Woollens

30°C

10:00

When the machine is switched on, the entry menu (with four
favourite programmes listed) appears and

Programme

selection

is highlighted.

Multi-function selector

Turning

the multi-function selector moves the highlighting to

the next option.

Pressing

the multi-function selector selects the highlighted

option.

Short cut buttons

Pressing a short cut button selects one of the four favourite
programmes shown on the left of the display.

If you wish to change the programmes shown in this list you
can do so (see "Saving a favourite programme" for more
information).

The short cut buttons have different functions in the other
menus. Where this is the case, an arrow

will appear in the

display above the short cut button, together with a
description of its function .

Programme selection

There are two ways of selecting a programme:

– Option 1: Select

Programme selection

from the display and

press the multi-function selector.

– Option 2: Press short cut button

This will automatically take you into the main menu for that
programme.

Operating the machine

Summary of Contents for PW 5105 Vario





























































Search results

Summary of Contents for PW 5105 Vario

Reviews:

Related manuals for PW 5105 Vario

Brands by name

Popular brands

Miele PW 5105 Vario, Operating And Installation Instructions

Search results

Summary of Contents for PW 5105 Vario

Reviews:

Related manuals for PW 5105 Vario

Brands by name

Popular brands