The
Settings
menu (except for
Suds
cooling
,
Display contrast
and
Display
brightness
) are locked by a code to
prevent them being accessed by
unauthorised personnel.
C
Display contrast
Display brightness
Supervisor level
^
Select
Supervisor level
and confirm
your selection.
C
Back
A
Access via code...
Change code...
^
Select
Access via code
and confirm
your selection.
Enter code
You will now be asked to enter a
3-figure code. The code is set at
000
at
the factory.
0
_ _
Enter code
^
Use the
+
button to enter the first
number. Confirm your selection of
this number by pressing the
OK
button. Now enter the second
number.
^
Repeat the process until all three
numbers have been entered.
^
After entering the code, press
OK
,
and confirm by pressing
OK
again.
You are now in Supervisor level.
You can alter all the settings described
previously as well as the settings on the
following pages.
Change code
You can alter the code if you want to
prevent it being accessed by
unauthorised personnel.
C
Display contrast
Display brightness
Supervisor level
^
Select
Supervisor level
and confirm
your selection.
C
Back
A
Access via code...
Change code...
^
Select
Change code
and confirm
your selection. Follow the instructions
in the display.
Settings/Supervisor level menu
63
