Maximum final spin speed
Programme
rpm
Standard 60°C
1400
Standard plus
1400
Thermal disinfection
1400
Chemo thermal dis.
1400
Cleaning cloths Hygiene
1400
Cleaning cloths 40°C/60°C
1400
Pads 40°C
1400
New mops
1400
Mops + treat
Not displayed*
Treat mops
Not displayed*
Finish cleaning cloths
Not displayed*
Curtains
600
Cottons universal
1400
Cottons hygiene
1400
Intensive
1400
Int
1400
Minimum iron
1000
Quick wash
1400
Separate rinse
1400
Drain / Spin
1400
* The spin speed depends on the
Spin-treat, std,
disin.
and
Spin & Finish clean cloths
settings.
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed.
To omit the final spin (Rinse hold)
^
Select the
Rinse hold
setting. The
laundry will not be spun and will
remain suspended in the final rinse
water.
– To start the final spin:
The machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the
Start
button.
– To end the programme:
Press the
Door
button. The water will
drain away. Press the
Door
button
again to open the door.
To omit the spin between rinses and
the final spin
^
Select the
Without spin
setting. The
water will be pumped away after the
last rinse cycle. At the end of the
programme, the drum continues to
turn at intervals for up to 30 minutes
to maintain uniform residual moisture
throughout the load and to help
prevent creasing (excluding the
Pads
and
New mops
programmes).
The
Rinse hold
and
Without spin
options are not available on the
Thermal disinfection
,
Chemo thermal
disinfection
and
Cleaning cloths
hygiene disinfection
programmes.
Spinning
21
