The relays are activated as shown in
the chart. The containers must be
filled with the correct detergent or
agent in the order specified.
Do not use
any detergents or agents
containing chloride or acids.
Empty sensor
When the
Empty sensor
is activated,
a message appears in the display to
show when an external liquid agent
container is empty (see
Settings/
Supervisor level menu
).
If a container is empty, the following
message will come up in the display
before the start of the programme or
whilst the programme is running:
i
Fill the dispensing
container
OK
A programme that has already been
started will continue to run until it has
finished.
^
Press the
OK
button to delete the
message in the display, and refill the
container.
If a
Disinfection programme
is
running, the following message is
displayed:
i
Fault
Container empty
OK
The programme will be cancelled.
^
Press the
OK
button to delete the
message in the display, and refill the
container.
^
Start the programme again.
,
If the container is empty for a
disinfection programme, you have to
assume that
no
disinfection has
taken place. Start the programme
again.
Detergent
37
