![background image](http://html.mh-extra.com/html/miele/proline-csda-1010/proline-csda-1010_operating-and-installation-instructions_236622031.webp)
Installation
31
Installation notes
Seal between the CombiSet and the
worktop
Do not use sealant between the
CombiSet and the worktop. This
could result in damage to the
CombiSet or the worktop if the
CombiSet ever needs to be removed
for servicing.
The sealing strip under the edge of
the top part of the appliance
provides a sufficient seal for the
worktop.
Tiled worktop
Grout lines
and the hatched area
underneath the CombiSet frame must
be smooth and even. If they are not the
CombiSet will not sit flush with the
worktop and the sealing strip
underneath the top part of the
appliance will not provide a good seal
between the appliance and the
worktop.
Fixing screws
The fixing screws supplied are suitable
for installation in a wooden worktop. If
the appliance is being installed in a
stone worktop, for example, use a
strong adhesive or double-sided tape
(not supplied) to secure the spacer bars
and spring clamps. Use silicone, for
example, around these components as
an additional means of securing them
to the worktop.
Summary of Contents for ProLine CSDA 1010
