Miele PG 8536 Operating Instructions Manual Download Page 9 | Manualshive

Page: 9 / 76

background image

~

In areas which may be subject to

infestation by cockroaches or other
vermin, pay particular attention to
keeping the appliance and its
surroundings in a clean condition at all
times. Any damage which may be
caused by cockroaches or other vermin
will not be covered by the guarantee.

~

Please follow the advice on

installation in these instructions and the
separate Installation Instructions.

Using accessories

~

Only use genuine Miele original

accessories with this washer-disinfector
and only use them for the purposes
they are designed for. Consult Miele on
the type and application of such
equipment.

~

Only use Miele mobile units, baskets

and inserts in this machine. Using
mobile units, baskets and inserts made
by other manufacturers, or making
modifications to Miele accessories, can
result in unsatisfactory cleaning and
disinfecting results, for which Miele
cannot be held liable. Any resultant
damage would also invalidate the
machine guarantee.

~

Only use chemical agents which

have been approved by their
manufacturer for use in the application
you are using. The chemical agent
manufacturer is responsible for any
negative influences on the material the
load is made from and for any damage
they may cause to the machine.

Symbols on the appliance

Warning:
Observe the operating
instructions.

Warning:
Danger of electric shock.

Disposing of your old machine

~

Please note that the machine may

have contamination from blood or other
bodily fluids in it and must be
decontaminated before disposal.
For environmental and safety reasons
ensure the machine is completely
drained of any residual water, chemical
residues and cleaning agent. Observe
safety regulations and wear safety
goggles and gloves.
Make the door lock inoperable, so that
children cannot accidentally shut
themselves in. Then make appropriate
arrangements for its safe disposal.
For tank system machines ensure that
any water is emptied out of the tank.

The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.

Warning and safety instructions

9

«
...
7
8
9
10
11
...
»

Summary of Contents for PG 8536













































































Reviews:

No comments

Related manuals for PG 8536

Brand: Haier Pages: 23

Brand: Hotpoint Pages: 20

Brand: ALBERTI Pages: 20

Brand: White-Westinghouse Pages: 16

Brand: EdgeStar Pages: 13

Brand: Qilive Pages: 178

Brand: JUNO Pages: 10

Brand: Parker Pages: 17

Brand: Hoover Pages: 17

Brand: Magic Chef Pages: 12

Brand: Sears Pages: 9

Brand: Simoniz Pages: 17

Brand: Gorenje Pages: 36

euroclean powerclean

Brand: Eureka Forbes Pages: 20

Brand: Hotpoint Pages: 16

Brand: Amana Pages: 16

Brand: Hobart Pages: 18

Brand: Indesit Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands