Delay start
The start time of a program can be
delayed from 30 minutes to 24 hours.
The delay is set in 30 minute
increments.
When using the Delay start function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry if necessary.
Otherwise the detergent could
clump and not rinse out completely.
^
Open the door.
^
Press the
-
button to turn the
dishwasher on.
The
-
indicator light comes on.
^
Use the Program button to select the
desired program.
^
Press the Delay start button.
The last Delay start time will appear in
the display. The Delay Start indicator
light comes on.
^
Set the desired Delay start time using
the Delay Start button.
If you press and hold the Delay Start
button, the time will increase
automatically to
24:00 h
. Then press
the Delay Start button twice to start at
30 minutes again.
^
Close the door.
If you don't close the door within a few
seconds after you have set the Delay
start time, the program runtime will
again appear in the display. You will
have to set the Delay start time again.
The time starts counting down in
minutes until the program start time.
When the set time is reached, the
selected program will start
automatically. The optical interface
lights up.
Starting a program before Delay start
has elapsed:
A program can be started before the
Delay start time has elapsed. Just do
the following:
^
Open the door.
^
Press the
-
button to turn the
dishwasher off.
^
Press the
-
button to turn the
dishwasher back on.
^
Use the Program button to select the
desired program.
^
Close the door to start the program.
The optical interface lights up to
confirm the start of a program
sequence.
Additional options
46
