![background image](http://html.mh-extra.com/html/miele/pg-8080/pg-8080_operating-instructions-manual_234962009.webp)
Correct installation
~
Do not install the machine in an area
where there is any danger of explosion
or of freezing conditions.
~
In order to ensure stability, a
built-under or integrated commercial
dishwasher must only be installed
under a continuous worktop which is
secured to adjacent cabinetry.
~
Furniture and fittings installed near
the machine must be of a commercial
standard able to withstand the effects
of steam and condensation.
Technical safety
~
This commercial dishwasher must
only be installed, commissioned and
repaired by the Miele Service
Department or an authorised Miele Ser-
vice Dealer. Installation, repair and
other work by unqualified persons
could be dangerous and Miele will not
be held liable.
~
The machine must be operated by
appropriately trained personnel only.
They must be instructed and trained
regularly.
~
Before using the machine check it
for any externally visible damage.
Under no circumstances should you
use it if it has been damaged. It could
be dangerous.
~
In the event of a damaged or
leaking machine, switch off at the mains
immediately and call the Miele Service
Department or an authorised Miele Ser-
vice dealer.
~
Repair work to the machine can only
be carried out by the Miele Service
Department or an authorised Miele Ser-
vice Dealer. Any unauthorised work will
invalidate the guarantee.
~
Faulty components must only be
replaced by genuine Miele original
spare parts. Only when these parts are
fitted can Miele guarantee the safety
standards of the machine.
~
Do not connect the machine to the
mains supply until it has been fully
installed and any adjustment has been
made to the door springs.
~
The electrical safety of the machine
can only be guaranteed if correctly
earthed. It is most important that this
basic requirement is observed and
regularly tested and where there is in
any doubt, the on-site wiring system
should be tested by a qualified
electrician.
Miele cannot be held liable for the
consequences of an inadequate
earthing system (e.g. electric shock).
~
Please follow the advice on
installation in these instructions and the
separate Installation diagram.
Warning and Safety instructions
9
Summary of Contents for PG 8080
Page 77: ...77 ...
Page 78: ...78 ...
Page 79: ...79 ...
Page 80: ...M Nr 09 402 650 00 Alteration rights reserved Publication date 22 06 2012 ...