Filling the salt container
30
Salt refill reminder
At the end of a program, fill the salt compartment with salt
whenever the message appears in the display.
Acknowledge the message with the
OK
button.
If no salt is added, the
symbol indicating low salt will appear beside
the program name on the right.
The low salt message will appear again at the end of each program.
Refill reminders can be displayed during the program cycle by
pressing the
OK
button.
If there are no additional refill reminders, the
symbol in the display
will go out after a few seconds once the salt has been refilled.
The salt refill reminder is deactivated if the dishwasher is set to a
water hardness of 0 - 0.7 mmol/l (0 - 4 °dH German scale).
Appliance lockdown due to low salt
If the low salt reminder is ignored for several program cycles and the
salt is not refilled, the appliance will be locked to prevent further use
until more salt is added.
The following message will appear in the display shortly before this
happens:
K
OK
Machine locking
Insufficient salt
Depending on the selected program and the water hardness setting,
only a few more program cycles will be possible.
If additional program cycles are run without the salt being refilled, the
dishwasher will be locked to prevent operation.
K
OK
Salt container empty,
Program locked
When reactivation salt is added, the appliance will automatically
unlock after a few seconds.
