manualshive.com logo in svg

Miele PDR 507 HP, Operating And Installation Instructions

Share
Download
Miele PDR 507 HP Operating And Installation Instructions Download Page 41

Programme chart

41

Programme packages

You can select various programme packages.
The programmes selected from the programme packages are displayed under

 

Special programmes

.

Sport

Sportswear

Max. load 3 kg*

Items

Sportswear which is suitable for drying in a tumble dryer.

Notes

This programme only dries to the 

Normal

 level.

Outerwear

Max. load 2.5 kg*

Normal, Hand iron plus

Items

Outerwear which is suitable for drying in a tumble dryer.

Proofing

Max. load 2.5 kg*

Items

Microfibre fabric, ski wear, outerwear, fine close weave cotton
garments (poplin), or tablecloths which are suitable for drying in a
tumble dryer and have been treated to provide a water and dirt-
resistant finish.

Notes

– This programme includes a proofing fixing phase.

– Only use proofing agents which are stated by the manufacturer as

being “suitable for use on membrane textiles”. These agents
contain fluorochemical compounds.

– Do not dry items which have been treated with proofing agents

containing paraffin. This substance is a fire hazard.

– This programme only dries to the 

Normal

 level.

Summary of Contents for PDR 507 HP





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands