Initial commissioning
25
Reference to external appli-
ances
A reference to external hardware ap-
pears.
Information
OK
With machine
switched off
connect external
hardware, then
switch on, or
select OK to
continue
Touch the
sensor control to read all
of the text in full.
Confirm with the
OK
sensor control.
Connect the XCI box before initial
commissioning. The tumble dryer
must be disconnected from the mains
for this process. Then start the com-
missioning process.
Setting the display brightness
OK
Brightness
–
70
+
%
Set the brightness you want with the
– and + sensor controls and confirm
your selection with the
OK
sensor
control.
The display will change to the next set-
ting.
Confirming the time request
Yes
No
Should the time of day
display not be shown?
Touch the
yes
or
no
sensor control.
If you select
yes
, the system will skip
the time setting.
If you select
no
, the display will switch
to the time setting.
Setting the time
OK
05
:
12
Clock display
Use the
and
sensor controls to
enter the time and confirm your entry
with
OK
.
The display will change to the next set-
ting.
