manualshive.com logo in svg

Miele PDR 307 EL CC, Operating And Installation Instructions

Share
Download
Miele PDR 307 EL CC Operating And Installation Instructions Download Page 32

5. Starting the programme

32

Starting the programme

The programme can be started as soon
as the 

Start/Stop

 sensor control is

flashing on and off.

Touch the 

Start/Stop

 sensor control.

The drying programme starts. The 

Start/

Stop

 sensor control lights up.

If a start delay has already been selec-
ted, this starts to count down before the
drying programme starts automatically.

 

Drying

 and the time left for the drying

programme are displayed.

The drying level reached is displayed if
a drying level programme is running.

Tip: 

Touching the 

 sensor control al-

lows you to display the options selec-
ted.

Programme duration/Estim-
ated time remaining

The programme duration depends on
the quantity of laundry, the type of fab-
ric and the residual moisture in the
laundry or also the water hardness. The
running time for drying level pro-
grammes can therefore vary or “jump”.
The tumble dryer's electronic control
system adapts to these factors and
then adjusts the displayed programme
duration with increasing accuracy.

Summary of Contents for PDR 307 EL CC





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands