Miele Paramount Operating Instructions Manual Download Page 10

Page: 10 / 72

Control panel

Extra option buttons

Various extra options can be added
to the washing programmes.

Display

See the following page for more
information.

Delay start button

For delaying the start time of a
programme.

Temperature button

For selecting a temperature.

Spin speed button

For selecting the final spin speed or

(Rinse hold) or

(Without

spin).

PC / Optical interface

This is used by service technicians
to run diagnostic checks on your
machine and can also be used to
update programming data in the
future.

Start/Stop button

For starting the programme selected
and cancelling a programme once it
has started.

Programme selector

For selecting a programme. The
indicator light next to the selected
programme will come on. The
programme selector can be turned
clockwise or anti-clockwise.

I-On/0-Off button

For switching the machine on or off.

Door button

Opens the machine door.

Operating the washing machine

Summary of Contents for Paramount









































































Search results

Summary of Contents for Paramount

Reviews:

Related manuals for Paramount

Brands by name

Popular brands

Miele Paramount, Operating Instructions Manual

Search results

Summary of Contents for Paramount

Reviews:

Related manuals for Paramount

Brands by name

Popular brands