Miele NOVOTRONIC G 856 SC ELITE Operating Instructions Manual Download Page 6 | Manualshive

Page: 6 / 52

background image

Ensure that any plastic wrappings,
bags etc. are disposed of safely

and kept out of the reach of babies and
young children. Danger of suffocation!

This dishwasher should only be in-
stalled under a continuous

countertop secured to adjacent
cabinetry.

Do not install this dishwasher be-
neath a cooking surface or oven.

Do not, under any circumstances
cut the intake hose or submerge in

liquid. This hose contains electrical
components that could cause injury or
property damage if cut or submerged.

Use

Only use the dishwasher if all pan-
els are properly in place.

Do not tamper with the controls.

To reduce the risk of injury, do not
allow children to play in, on, or

near the dishwasher.

Do not abuse, sit, or stand on the
door or baskets of the dishwasher.

Under certain conditions, hydrogen
gas may be produced in a hot

water system that has not been used
for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If the hot water
system has not been used for such a
period, turn on all hot water faucets and
let water flow from each for several min-
utes before using the dishwasher. This
will release any accumulated hydrogen
gas. Do not smoke or use an open
flame during this time.

Do not wash plastic items unless
they are labeled "dishwasher safe"

or the equivalent. For items not labeled,
check the manufacturer’s recommenda-
tions.

When loading tableware, place
sharp items away from the door

seal to prevent damage to the seal.
Load knives pointing downwards to
prevent injuries.

Only use detergents and rinse aids
recommended for residential dish-

washers. Keep all detergents and rinse
aids out of the reach of children.

Do not drink water from the dish-
washer! Harmful residues could be

present.

For dishwashers with visible heating
element

Do not touch the heating element
during or immediately after use.

Disposal of an appliance

If the appliance is removed from its
installation and will not be used,

the door to the wash cabinet should be
removed to prevent children from being
locked in the machine. When discard-
ing an old dishwasher, unplug it from
the power outlet, remove the door to the
wash cabinet and cut off the power
cord.

SAVE THESE

INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

6

«
...
4
5
6
7
8
...
»

Summary of Contents for NOVOTRONIC G 856 SC ELITE





















































Reviews:

No comments

Related manuals for NOVOTRONIC G 856 SC ELITE

Brand: Ignis Pages: 28

Brand: Dacor Pages: 29

Brand: Maidaid Halcyon Pages: 15

Brand: Asko Pages: 59

Brand: Splendide Pages: 2

Brand: Technika Pages: 42

T-1200 WC1200XA-12

Brand: Dexter Laundry Pages: 25

Brand: Heinner Pages: 50

Brand: Solt Pages: 11

Brand: Crystal Pages: 38

Brand: ZANKER Pages: 22

Brand: Haier Pages: 64

Brand: Electrolux Pages: 28

Brand: Electrolux Pages: 28

Brand: Electrolux Pages: 24

Brand: Electrolux Pages: 44

Brand: Electrolux Pages: 24

Brand: Electrolux Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands