Miele NOVOTRONIC G 856 SC ELITE Operating Instructions Manual Download Page 5 | Manualshive

Page: 5 / 52

background image

WARNING –

When using your dishwasher, follow
basic precautions, including the fol-
lowing:

Read all instructions before installa-
tion or use of the dishwasher to pre-
vent injury and machine damage.

The manufacturer cannot be held re-
sponsible for damage or injury
caused by improper use of this ap-
pliance.

Use the dishwasher only for its in-
tended purpose. This appliance is
intended for residential use only.

Keep these operating instructions in
a safe place and pass them on to
any future user.

Electrical safety

Before installation make sure that
the voltage and frequency listed on

the data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.

Before installation or service, dis-
connect the power supply to the

work area by unplugging the unit, “trip-
ping” the circuit breaker or removing
the fuse.

Do not use an extension cord to
connect this appliance to electric-

ity. Extension cords do not guarantee
the required safety of the appliance
(e.g. danger of overheating).

Be certain your appliance is prop-
erly installed and grounded by a

qualified technician. To guarantee the
electrical safety of this appliance, conti-
nuity must exist between the appliance
and an effective grounding system. It is
imperative that this basic safety require-
ment be met. If there is any doubt, have
the electrical system of the house
checked by a qualified electrician. The
manufacturer cannot be held responsi-
ble for damages caused by the lack, or
inadequacy of, an effective grounding
system.

Installation

Installation and repair work should
be by a Miele authorized service

technician. Work by unqualified per-
sons could be dangerous and could
void the warranty.

This equipment is not designed for
maritime use or for use in mobile

installations such as caravans or air-
craft. However, under certain conditions
it may be possible for an installation in
these applications. Please contact the
nearest Miele dealer or the Miele Tech-
nical Service Department with specific
requirements.

Inspect the dishwasher for ship-
ping damage. Do not install or op-

erate a damaged unit. Contact the
place of purchase.

IMPORTANT SAFETY INSTRUCTIONS

5

«
...
3
4
5
6
7
...
»

Summary of Contents for NOVOTRONIC G 856 SC ELITE





















































Reviews:

No comments

Related manuals for NOVOTRONIC G 856 SC ELITE

Brand: Haier Pages: 8

Brand: GEAppliances Pages: 72

Brand: Gorenje Pages: 38

Brand: Hoonved Pages: 18

Brand: Manta Pages: 19

Brand: Hoover Pages: 33

Brand: Splendide Pages: 24

Brand: Insinger Pages: 104

Brand: ZANKER Pages: 48

Brand: Sindelen Pages: 16

Brand: Bosch Pages: 68

Brand: Jenn-Air Pages: 14

Brand: Tricity Bendix Pages: 12

Brand: Blue Seal Pages: 20

Brand: Smeg Pages: 12

Brand: Smeg Pages: 19

Brand: DC Pages: 2

Brand: Rasonic Pages: 50

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands