You can change the standard default
settings by altering the "status" of the
setting.
Please consult the chart for the different
options.
The factory settings are marked with a
star* on the chart.
Proceed as follows:
^
Press and hold the
m
and M buttons
at the same time until
P I
and
v
light
up in the display. Then release them.
If you press them for too long, the
time of day will appear again in the
display.
^
Use the time selector to select the
setting that you wish to change (
P I
bis
P 5
und
P 0
). Turn it until the
setting required shows in the display.
^
Then press the M button to call up
the setting.
S
will appear in the display to show
that the setting can be changed.
^
Turn the time selector if you wish to
change the setting (see chart), and
confirm your entry by pressing the M
button (for
P 5
and
P 0
, press and
hold the M button for approx.
4 seconds).
The change to the status is then stored
in memory. "
P
" will appear in the display
again together with the number for the
setting.
The other settings can be changed in
the same way.
^
When you have finished making the
changes you require, press the
Stop/C button.
The altered settings are retained
after a power cut.
Changing the settings
46
Downloaded From Microwave-Manual.com Manuals